★ Pool Acid Washing
For stained or discolored plaster and pebble finishes. We inspect the surface first, then drain, acid wash, neutralize and refill. Licensed, bonded and insured, ROC #288595.
When Brushing Stops Working
An acid wash treats stains in the pool's surface. We drain the pool and apply an acid solution that takes off a very thin layer of the finish, exposing a cleaner layer underneath. It works on plaster and pebble (exposed aggregate) finishes, but not every surface is a good fit, so we check the type and condition of your finish before recommending one. One thing it does not fix is the white calcium ring at the waterline. That ring sits on the tile, and it comes off with tile cleaning, not an acid wash.
Step by Step
We look at the surface, the stains and the overall condition of the finish to decide whether an acid wash is the right call.
When draining is needed, we use the right equipment and plan around groundwater, weather and how the pool is built.
Once the pool is empty, we clear out debris and get the surface ready.
We carefully apply the acid solution to surfaces that can take it, to lift stubborn staining and discoloration.
We neutralize the leftover solution and remove it with proper handling and disposal.
Then the pool is refilled and the water balanced. Proper startup chemistry protects the finish and your equipment.
Pick the Right Fix
Not every green or dirty pool needs to be drained or acid washed. We look at the pool first and recommend the fix that solves the problem without extra treatments or expense.
For staining that is still there after algae treatment, heavy surface discoloration, or stains normal cleaning has not corrected. Also worth a look when the pool is being drained for water chemistry anyway.
For water that has turned green from algae while the surface is in good shape. If the chemistry can be corrected and the filter can clear the water, no drain is needed.
See Green to CleanFor the white calcium ring at the waterline. That buildup is on the tile, so it calls for tile cleaning rather than an acid wash.
What It Helps With
Hard water, extreme heat and heavy chemical use take a toll on Arizona pool finishes. When brushing and chemicals stop working, an acid wash can help with these.
Marks left on the surface after a severe algae problem, even once the water has been treated.
Mineral discoloration that builds up from Arizona's hard water.
Stains left by leaves and debris.
Rust spots and other stains that sit in the surface.
Surface discoloration that has built up over the years.
Stains that normal brushing and chemical treatment have not removed.
Why H2O Pool Service
Every acid wash takes a thin layer off the finish, so it should only be done when the surface needs it. We check your finish and the stains first and give you a clear estimate before any work begins. If the real problem is the water, high stabilizer or the tile line, we will tell you that instead. We can also help with weekly pool maintenance, filter cleaning, equipment repairs, tile cleaning, and pool remodeling.
Arizona ROC #288595, serving Surprise and the West Valley.
We confirm your plaster or pebble finish can take an acid wash before we recommend one.
Leftover solution is neutralized and removed with proper handling and disposal.
We test your water and tell you when high stabilizer or calcium hardness means it is time to drain.
Questions
No. The white calcium ring at the waterline is on the tile, and it comes off with tile cleaning. An acid wash treats stains in the plaster or pebble surface of the pool.
Yes. We acid wash both plaster and pebble (exposed aggregate) finishes. Not every finish is a good candidate, so we inspect the type and condition of the surface before recommending one.
There is no set schedule. Each wash removes a small amount of the finish and can shorten its life, so we only recommend one when the condition of the surface calls for it.
It removes a thin layer of the surface, so it has to be done carefully. Older, worn or unsuitable finishes may not be good candidates, and some stains will not come out completely. We inspect the pool first and tell you what to expect.
No. CYA is dissolved in the water, so the way to lower it is to drain and replace some or all of the water. Chlorine tablets keep adding stabilizer, and too much of it makes chlorine less effective unless free chlorine is raised to match, which makes algae harder to control. If you are draining for high CYA anyway, that is a good time to deal with surface stains too.
Many Arizona pools need some or all of the water replaced every three to five years, depending on stabilizer, calcium hardness, water quality and chemical use. Regular water testing tells you when it is time.
November through March is typically the best season. Cooler weather lowers the risk of the finish drying too fast or taking heat damage while the pool is empty, and it gets water chemistry sorted before swimming season.
It depends on the size and condition of the pool, the weather, the drain and the refill time. We give you an estimated schedule after we look at the pool.
Usually not. As long as our technicians can get into the pool area with their equipment, the work can be done without you there.
Bring the Bright Back
Request a free estimate. We will look at your pool and tell you honestly whether it needs an acid wash, a drain and refill, or neither, before any work begins. November through March is the best season to drain and acid wash.